Anaerobic Incubator

Category： Thermostatic Chamber
Brand:Shu Yu
Name：Anaerobic Incubator
Applicable:Hospital.Laboratory,Medical,School
INQUIRY EMAIL

Description

1.The salt spray test chamber is a kind of salt spray corrosion test equipment that artificially simulates the marine climate environment. It is used to assess the adaptability and reliability of electrical equipment and electronic components under marine climate conditions; it is also used to judge and assess the corrosion resistance of electroplated layers and paint coatings on metal coverings, as well as to conduct accelerated corrosion tests for identifying metal materials.

2.The design and manufacture of this product comply with the national standard GB 10587 *Technical Requirements for Salt Spray Test Chambers*; sample tests can be carried out in accordance with national standards such as GB 2423.17 *Basic Environmental Test Procedures for Electrical and Electronic Products - Test Ka: Salt Spray Test Method* and IEC 60068 - 2 - 11 *Basic Environmental Test Procedures - Part 2: Test Ka: Salt Spray* for relevant salt spray tests.

Features

1.The shell material of the salt spray test chamber is molded by a polyester glass fiber reinforced plastic mold. The appearance is smooth and beautiful, and it has the characteristics of good acid and alkali resistance, corrosion resistance, light weight, and high strength.

2.This product is equipped with a device for controlling and adjusting the amount of salt spray settlement. It has the dual adjustment functions of intake pressure and spray pressure, so that the salt spray test meets the standard requirements. The spray electrical control adopts a high-precision microcomputer P.I.D. intelligent controller, a Pt100 platinum resistance sensor, and a large-screen backlit liquid crystal display. The tower-type spray system ensures uniform distribution of salt spray, and the settlement amount can be adjusted freely. The upper cover adopts a water-sealed structure, without salt spray overflow. The spray has two modes, continuous spray and periodic spray, for users to choose from. After the spray and pause times of the periodic spray controller are set, it can work automatically, and the operation is simple and convenient. It has an independent over-temperature protection device, an over-temperature sound and light alarm device, and the timing range is 1min - 999 hours and 59 minutes.

3.The chamber door can be made of glass fiber reinforced plastic or transparent PVC material. The upper cover of the transparent PVC material can monitor the spray status in the chamber and the working condition of the samples at any time.

4.The opening of the chamber door is activated by compressed air, which is easy to operate (only for the YW - 1000 type).

Parameters

Serial No.	Item	Technical Parameters
1	Product Model	YW-150	YW-250	YW-750	YW-1000
2	Temperature Control Range	Room Temperature +5 - 50°C (uniform for all models)
3	Temperature Resolution	0.1°C (uniform for all models)
4	Temperature Fluctuation	±0.5°C (uniform for all models)
5	Salt Spray Sedimentation Rate	1.0 - 2.0ml/h·80cm² (uniform for all models)
6	Spray Method	Continuous Spray, Periodic Spray (either optional, uniform for all models)
7	Power	1500W	2500W	4500W	5500W
8	Working Power Supply	AC 220V 50Hz (for some models)		AC 380V 50Hz (for other models)
9	Chamber Dimensions (mm)	580×450×400	1000×640×500	1100×740×600	1300×1000×700
10	Overall Dimensions (mm)	1180×760×1100	1550×880×1230	1650×1050×1300	1880×1230×1660